Compoflex® RF 3

Compoflex® RF 3 is a peel ply, release film and flow mesh, used to control flow rate, distribute resin and release consumables from a composite laminate. 

Compoflex® RF 3 generates a very smooth surface ideal for painting of the composite laminate. For secondary bonding we recommend Compoflex® SB. Release film perforation style: Medium bleed characteristics.

Compoflex® RF 3 is designed to efficiently distribute resin with limited waste due to the low profile and tight construction. Works well with polyester, vinylester, epoxy, phenolic and other types of resin.

Technical data

Property Compoflex RF 3 Standard
Recommended working temperature 145°C (293°F)  -
Fibre type Polypropylene (nonwoven)/High density Polyethylene (grid)  -
Fabric construction Nonwoven -
Weight 335 gsm EN 965
Thickness 1.6 mm ISO 9863 - 1
Tear resistance MD/CD 280 N/188 N ISO 9073 - 4
Pore size  < 10 μm ISO 12956

Notes

Maximum temperature is depending on process and Fibertex always recommends testing prior to use.
Above technical data are indicative.
MD = Machine direction  
CD = Cross direction

Sizes
Width: 1.52 m (45.4 inch)
Length: 61 m (200 ft.)
Packing: 10 rolls per pallet each roll in clear foil 

Rolls can be cut to size maximum width available is 2.3 m (90.8 inch).
* Tear resistance MD/CD is measured without infusion net.

Icon_Composites_blue

Do you want to go back to the product overview?

Product overview

Contact

Find Contact Person

Find a relevant contact person within the composites business area.