Surfitex™ benefits include

  • High-quality surface finish
  • Improved aesthetics and surface smoothness
  • Reduced reinforcement print-through
  • Elimination of surface penetration of reinforcement fibres
  • Superior corrosion resistance
  • Enhanced abrasion resistance
  • Improved resistance to UV discolouration and degradation
  • Reduced die-wear, lowering pulling forces and increased line speeds
  • Mouldability to complex shapes
  • Fast wet-out increases processing speed
  • Elimination of micro-cracks
Composites_Glass reinforced pipes

100% polyester – hydro-entangled – no binders

Surfitex™ is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. 

Surfitex™ is manufactured from100% polyester fibres, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.

Surfitex™ gives FRP components a resin-rich surface that enhances weathering and corrosion resistence and reduces UV degradation. It also provides a smooth, crack and craze-resistant finish, minimising reinforcement print-through.


Surfitex™ are hydro-entangled polyester surface veils for FRP, with advantages over standard C or ECR glass veils/tissues.

These advantages include:
• Improved corrosion resistance
• Improved UV andweathering resistance
• Binder-free (hydro-entangled – no risk of chemical contamination of the resin)
• Compatible with all resin types
• Easy resin wet-out and infusion
• Retains tensile strength when wet
• Improved aestheticsand smoother surface for pultrusions
• Cost-effective solution

Technical data

Characteristic Units Standard

E 30 L
Nominal values

E 35 NL
Nominal values
EU 45 NL
Nominal values
Weight gsm ISO 9073-1
Samples 500 cm2
30 35 45
Thickness mm ISO 9073-2
0.5 kPa / 25cm2
0.40 0.40 0.5
Maximal tensile strength M.D. N/5 cm ISO 9073-3
Dist. 200 mm / Speed 100
70 100 135
Maximal tensile strength C.D. N/5 cm ISO 9073-3
Dist. 200 mm / Speed 100
10 60 50
Extension at maximum load M.D. % ISO 9073-3
Dist. 200 mm / Speed 100
20 35 35
Extension at maximum load C.D. % ISO 9073-3
Dist. 200 mm / Speed 100
190 70 80



Find Contact Person

Find a relevant contact person from the composites business area by choosing your region or country.

Relevant Brochures

Surfitex™ synthetic surface veils