Skip Ribbon Commands
Skip to main content

Skip Navigation LinksPath:
> Home > Business Areas > Composites > Installation


Important information by the use of Compoflex®

ALWAYS place the smooth side against the laminate.

ALWAYS place the fluffy side against the vacuum bag.

We always recommend testing on a small part prior to full scale installation.

Easy lay-up with only one product. 

Can be pre-cut wtih a CNC or hand cut with scissors.

Overlap possible.

Works well with polyester, vinylester, epoxy, phenolic and other types of resin



The melting point for polypropylene is 165°C (329°F)

Recommended working temperature is approx. 145°C (293°F).

Maximum temperature is depending on process -

we do have customers using Compoflex at 200°C (392°F). This is because Compoflex performs before the temperature exceeds  the melting point. Peeling is just as easy and the material becomes stable again