Description

Compoflex® SB RF 3 is a peel ply, release film and flow mesh, used to control flow rate, distribute resin and release consumables from a composite laminate.

Compoflex® SB RF 3 generates a very rough and textured surface ideal for secondary bonding or painting of a composite laminate.

Compoflex® SB may reduce or eliminate the need for sanding or abrading. Best results with epoxy resin, but we always recommend testing.

Release film perforation style: Low to medium bleed characteristics

Compoflex® SB RF 3 is designed to efficiently distribute resin with limited waste due to the low profile and tight construction.

Works well with polyester, vinylester, epoxy, phenolic and other types of resin.

Technical data

Property	Compoflex SB RF 3	Standard
Recommended working temperature	145°C (293°F)	-
Fibre type	Polypropylene (nonwoven)/Polyester (grid)	-
Fabric construction	Nonwoven	-
Weight	315 g/ m2	EN 195
Thickness	1.4 mm	ISO 9863 - 1
Tear resistance MD/CD	280 N/188 N	ISO 9073 - 4
Pore size	< 10 μm	ISO 12956

Notes

Maximum temperature is depending on process and Fibertex always recommends testing prior to use.
Above technical data are indicative.
MD = Machine direction 
CD = Cross direction

Sizes:	Width	1.15 m (45.4 inch)
	Length	61 m (200 ft.)
	Packing	10 rolls per pallet each roll in clear foil

Rolls can be cut to size maximum width available is 2.1 m (82.9 inch)

.  

 

Back to products overview